YRT bearings consist of a thrust/radial seat ring, a thrust/radial shaft ring, a thrust washer, two needle roller cage assemblies and a set of radial cylindrical rollers. The seat ring and shaft ring have evenly distributed mounting screw holes. This type of bearing has high axial and radial load capacity. YRT bearings are usually used to support rotary tables, indexing heads and multi-axis heads of machining centers. MONTON can provide YRT bearings with inner diameters ranging from 50mm to 1030 mm. YRT bearings can withstand radial loads, bidirectional axial loads and moment loads, whether these loads act alone or in any combination. There are evenly distributed mounting holes on the bearings, which can be directly fixed to the bearing enterprise by bolts: the bearings are preloaded when leaving the factory, and there is no need to adjust the clearance during installation; this series of products is suitable for occasions with relatively low speeds, short operating time cycles, and high requirements for alignment and precision.

YRTC rotary table bearings have same size as YRT rotary table bearings. YRTC rotary table bearings have ultra-long life quality and are mainly used in high-load indexing and swinging shaft systems and on plane milling machines. MONTON can provide YRTC rotary table bearings with inner diameters ranging from 100mm to 1030mm. YRTC rotary table bearings can withstand radial loads, bidirectional axial loads and moment loads, whether these loads act alone or in any combination at the same time.

YRTM is a bidirectional thrust cylindrical roller YRT combination bearing with a steel scale, which can monitor and adjust the rotation accuracy of the bidirectional thrust cylindrical roller combination bearing in real time to ensure high-precision operation of the machine. Based on the YRT standard series, an angle measurement system is integrated to achieve accurate angle measurement with a maximum accuracy of 1 arc second, which is very suitable for applications with high requirements for angle positioning accuracy.

YRTS rotary table bearing hava same structural dimensions as the YRT series, but the internal structure is different from the YRT series, which determines that the limit speed of this series is higher than that of the YRT series, and the friction torque is lower and more uniform than that of the YRT series. Therefore, this series can be selected for occasions that require relatively low friction but relatively high speed, such as bearings used in shafts driven by direct drive motors. For the bearing arrangement of direct drive shafts, its limit speed is very high, and the friction is very low and uniform in the entire speed range. These bearings are particularly suitable for use with torque motors.

ZKLDF high speed Double direction rotary table axial angular contact ball bearing can also bear combined loads, but with extremely high speed and extremely low friction torque, while ensuring high rotation accuracy. It is very suitable for some demanding applications, such as high-speed rotary tables, milling, grinding, honing heads, and precision measurement and testing equipment. ZKLDF high speed Double direction rotary table axial angular contact ball bearing has the characteristics of low friction, high rotation accuracy, high limit speed, etc. It can bear high axial and radial loads and has high tilting stiffness. This type of bearing is particularly suitable for applications in the field of composite loads and precision, and is widely used in machine tool rotary tables, grinding heads and various test equipment.